발견 54 제품 "
power system protection relays
"
전자기 릴레이 모터 보호 열 하중 초과 릴레이 UL 승인
Electromagnetic Relay Motor Protection Thermal Overload Relay UL Approvals UKH series thermal overload relays apply to industrial circuit of AC 50Hz or 60Hz, rated voltage to below 660V and rated current . 1A-800A for AC motor overload and open-phase protection during long time or intermittent long time service, which can also protect 3-phase serious imbalance and long starting time of motor or long timer operation, can also be used for corresponding AC contactor for
AC 접촉기를 가진 10A 수동/자동적인 하중 초과 열 릴레이를 분류하십시오
Class 10A Manual / Automatic Overload Thermal Relay With AC Contactor Thermal overload relays are protective devices. They are designed to cut power if the motor draws too much current for an extended period of time. To accomplish this, thermal overload relays contain a normally closed (NC) relay. When excessive current flows through the motor circuit, the relay opens due to increased motor temperature, relay temperature, or sensed overload current, depending on the relay
바이메탈 과부하 릴레이
Bimetallic thermal overload relay 9A,12A, 18A, 22A for motor protection Thermal overload relays are protective devices. They are designed to cut power if the motor draws too much current for an extended period of time. To accomplish this, thermal overload relays contain a normally closed (NC) relay. When excessive current flows through the motor circuit, the relay opens due to increased motor temperature, relay temperature, or sensed overload current, depending on the relay
AC 3 단계 ls 열 하중 초과 릴레이, 100A 125A 접촉기 릴레이
AC 3 Phase ls Thermal Overload Relay , 100A 125A Contactor Relay Thermal overload relays are protective devices. They are designed to cut power if the motor draws too much current for an extended period of time. To accomplish this, thermal overload relays contain a normally closed (NC) relay. When excessive current flows through the motor circuit, the relay opens due to increased motor temperature, relay temperature, or sensed overload current, depending on the relay type.
GTH-220 모터 접촉기를 위한 삼상 전자 하중 초과 릴레이
GTH-220 Three phase Electronic Overload Relays for Motor Contactor UKH series thermal overload relays apply to circuit of AC 50Hz or 60Hz, rated voltage to below 660V and rated current . 1A-800A for AC motor overload and open-phase protection during long time or intermittent long time service, which can also protect 3-phase serious imbalance and long starting time of motor or long timer operation, can also be used for corresponding AC contactor for electromagnetic starter.
안전 단계 실패 보호 산업 릴레이, 쉬운 가동
Safety Phase Failure Protection Industrial Relays , Easy Operation Thermal overload relays are protective devices. They are designed to cut power if the motor draws too much current for an extended period of time. To accomplish this, thermal overload relays contain a normally closed (NC) relay. When excessive current flows through the motor circuit, the relay opens due to increased motor temperature, relay temperature, or sensed overload current, depending on the relay type.
Portable 출구, IEC E. - 유럽인 Standad를 가진 50 Amp 전원 분배 상자
Portable 50 Amp Power Distribution Box with Outlet , IEC EN European Standad Descriptions: UK series metal power maintenance box is in line with relative IEC standards, which is for electrical network (50-60Hz, Voltage not higher than 660V). At the same time, they are with circuit protection like overload, short circuit and current leakage and provide the power outlets for electrical equipments. Various structures: unfold box-type, concealed-embedded, mobile, portable and etc
80mm ZCT80 릴레이 보호를 위한 0대 단계 현재 변압기 0.3A 3kV
80mm ZCT80 Zero Phase Current Transformer 0.3A 3kV for Relay Protection Description: This type of current transformer is used indoor to measure the current and energy and perform relaying protection in AC circuit rated voltage up to 660V and rated frequency 50/60hz. The item is designed into moulded case protection structure and widely applied to complete cabinet body. This product performance is in accordance with the standard IEC185 Applications: Electric fire monitoring
전원 시스템 누설 보호 0 현재 변압기 55mm 0.3A
Power System Leakage Protection Zero Current Transformer 55mm 0.3A Description: A zero-phase current transformer for use as a leakage current detecting element in a leakage current interrupter in which two magnetic materials of different permeability are provided so as to eliminate a range where the leakage current interrupter is inoperable without lowering its ability to distinguish noise components. The different magnetic materials may be provided as a single core
